Feature Availability
Available on CircularONE Mobile App only.
Introduction
SmartPour pairing refers to the process of configuring and connecting SmartPour dispensing units to the Internet of Things (IoT) network.
SmartPour Pairing
Caution!
In the event that enabling and turning on Location and Bluetooth does not enable you to proceed to the next step, you may have to exit and reload the CircularONE Mobile App.
Please carry out SmartPour Pairing using one hardware at any point of time.
To pair a SmartPour, you can:
Steps | ||
|---|---|---|
1 | Head to ‘Pairing’ under Hardware Management | |
2 | View the summary synopsis for SmartPour Pairing and select ‘Start Pairing’ to begin | |
| ||
3 | View the workflow requirements | |
4 | View the instructions to scan the SmartPour and select ‘Start Scanning’ to proceed | |
| ||
5 | Scan the ScanPour hardware code either by QR Code, NFC or Manual Input | |
| ||
6 | If successful, you will be directed to the next step to set up the SmartPour in Pairing Mode | |
7 | Check the checkbox to confirm that the Wi-Fi icon is blinking on the SmartPour and select ‘Continue’ to proceed | |
| ||
8 | If you’re performing SmartPour pairing for the first time, you will need to turn on your bluetooth and make sure both location and settings are enabled on your mobile device | |
| ||
9 | Once enabled, the mobile device will scan for a SmartPour to pair | |
| ||
10 | Once a SmartPour has been detected, you will see the corresponding SmartPour reflected. Select the SmartPour that you would like to pair. | |
| ||
11 | You will be directed to key in your Wi-Fi credentials. You can either scan your Wi-Fi Code or key in the credentials manually. Select ‘Confirm’ once you have completed. | |
| ||
12 | If successful, the pairing process will begin (You will be redirected to re-pair your SmartPour once the process has timed out after 3 minutes.) | |
| ||
13 | Once the SmartPour has been successfully paired, you will be able to select one of the 4 available options to continue
| |
| ||
